Difficulty

Easy

Steps

9

Time Required

                          20 minutes

Sections

2

  • Motherboard
  • 7 steps
  • Volume Buttons
  • 2 steps

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackCasio G’zOne Commando 4G LTE

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove front and back screws
  • Using the Phillips #00 screwdriver remove the front and back 5.0 mm screws as shown in the picture.
  • There are four screws in the back and two screws in the front.

Using the Phillips #00 screwdriver remove the front and back 5.0 mm screws as shown in the picture.

There are four screws in the back and two screws in the front.

1024

Step 2

              Remove side-Back cover
  • Gently remove the side cover from the phone by lifting up on the corners as shown in the picture.
  • Press down on the screen to help remove the plastic side cover from the phone.
  • Make sure to push gently because the frame is fragile.

Gently remove the side cover from the phone by lifting up on the corners as shown in the picture.

Press down on the screen to help remove the plastic side cover from the phone.

Make sure to push gently because the frame is fragile.

Step 3

              Remove Side-Front cover
  • Pull the side front cover off the face of the phone.

Pull the side front cover off the face of the phone.

Step 4

  • Remove the eight 2.5mm Phillips #00 screws in the holes of the casing.

Remove the eight 2.5mm Phillips #00 screws in the holes of the casing.

Step 5

  • Gently pull off the motherboard cover.

Gently pull off the motherboard cover.

Step 6

  • Using the Phillips #00, remove all 2.5 mm screws attached to the motherboard.
  • Do not touch the integrated circuits in the motherboard.

Using the Phillips #00, remove all 2.5 mm screws attached to the motherboard.

Do not touch the integrated circuits in the motherboard.

Step 7

              Motherboard
  • Gently remove the motherboard with the spudger.

Gently remove the motherboard with the spudger.

Step 8

              Removing external volume pads
  • Following step 4 in the prerequisite guide, remove the volume pads located on the side of the phone with a gentle pull.

Following step 4 in the prerequisite guide, remove the volume pads located on the side of the phone with a gentle pull.

Step 9

              Removing internal volume buttons
  • Following step 6, remove the adapter connecting the volume buttons to the motherboard.

Following step 6, remove the adapter connecting the volume buttons to the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Brett Boehm

Member since: 09/25/2014

281 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team 1-5, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 1-5, Brown Fall 2014 



                    USFT-BROWN-F14S1G5                     


                                            3 Members                     


                                            3 Guides authored