Difficulty

Moderate

Steps

9

Time Required

                          30 minutes

Sections

2

  • Battery
  • 2 steps
  • Motherboard
  • 7 steps

Flags

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackCasio G’zOne Commando 4G LTE

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Open back cover.
  • This device is waterproof and well sealed, so it is difficult to open this handset.
  • Start by opening the cover of the handset.
  • Do not use your nails to open the cover. Use the iFixit Opening Tool (refer to the image).

This device is waterproof and well sealed, so it is difficult to open this handset.

Start by opening the cover of the handset.

Do not use your nails to open the cover. Use the iFixit Opening Tool (refer to the image).

1024

Step 2

              Free and remove the battery
  • Move the orange tab to the right side to take out the battery.
  • Remove the battery.

Move the orange tab to the right side to take out the battery.

Remove the battery.

Step 3

              Remove front and back screws
  • Using the Phillips #00 screwdriver remove the front and back 5.0 mm screws as shown in the picture.
  • There are four screws in the back and two screws in the front.

Using the Phillips #00 screwdriver remove the front and back 5.0 mm screws as shown in the picture.

There are four screws in the back and two screws in the front.

Step 4

              Remove side-Back cover
  • Gently remove the side cover from the phone by lifting up on the corners as shown in the picture.
  • Press down on the screen to help remove the plastic side cover from the phone.
  • Make sure to push gently because the frame is fragile.

Gently remove the side cover from the phone by lifting up on the corners as shown in the picture.

Press down on the screen to help remove the plastic side cover from the phone.

Make sure to push gently because the frame is fragile.

Step 5

              Remove Side-Front cover
  • Pull the side front cover off the face of the phone.

Pull the side front cover off the face of the phone.

Step 6

  • Remove the eight 2.5mm Phillips #00 screws in the holes of the casing.

Remove the eight 2.5mm Phillips #00 screws in the holes of the casing.

Step 7

  • Gently pull off the motherboard cover.

Gently pull off the motherboard cover.

Step 8

  • Using the Phillips #00, remove all 2.5 mm screws attached to the motherboard.
  • Do not touch the integrated circuits in the motherboard.

Using the Phillips #00, remove all 2.5 mm screws attached to the motherboard.

Do not touch the integrated circuits in the motherboard.

Step 9

              Motherboard
  • Gently remove the motherboard with the spudger.

Gently remove the motherboard with the spudger.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 7 other contributors 


                    Brett Boehm

Member since: 09/25/2014

281 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team 1-5, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 1-5, Brown Fall 2014 



                    USFT-BROWN-F14S1G5                     


                                            3 Members                     


                                            3 Guides authored