Difficulty

Moderate

Steps

20

Time Required

Suggest a time??

Sections

1

  • Zoom Lens
  • 20 steps

Flags

4

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Missed a Step

Oops! This guide is currently missing some important steps.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackCasio Exilim EX-Z850

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Zoom Lens
  • Remove the four screws on the side with the speaker

Remove the four screws on the side with the speaker

1024

Step 2

  • Remove the four screws from the bottom of the camera.
  • Note: Bottom screws are longer than the top ones, so label accordingly for easy reassembly

Remove the four screws from the bottom of the camera.

Note: Bottom screws are longer than the top ones, so label accordingly for easy reassembly

Step 3

  • Remove the four screws on the side opposite of the speaker.

Remove the four screws on the side opposite of the speaker.

Step 4

  • Once all screws have been removed, gently pry open bottom casing.
  • With tweezers, carefully remove ribbon from LCD screen.
  • Set bottom casing aside.

Once all screws have been removed, gently pry open bottom casing.

With tweezers, carefully remove ribbon from LCD screen.

Set bottom casing aside.

Step 5

  • Remove ribbon from the rear casing.
  • Set aside rear casing.

Remove ribbon from the rear casing.

Set aside rear casing.

Step 6

  • Use tweezers or prongs to pry the LCD screen off from the opening.
  • Note: the bottom of the LCD screen is attached to the frame by a few pieces of black tape.

Use tweezers or prongs to pry the LCD screen off from the opening.

Note: the bottom of the LCD screen is attached to the frame by a few pieces of black tape.

Step 7

  • Lift up the LCD screen, slowly move it to the other side.

Lift up the LCD screen, slowly move it to the other side.

Step 8

  • Pry off the LCD casing which is taped on to the frame.

Pry off the LCD casing which is taped on to the frame.

Step 9

  • Flip open the connector holding the ribbon.
  • Pull out the LCD screen with the ribbon from the camera.

Flip open the connector holding the ribbon.

Pull out the LCD screen with the ribbon from the camera.

Step 10

  • Pull apart the front casing.

Pull apart the front casing.

Step 11

  • Remove two screws on the side where the battery is located.
  • Remove the lanyard loop after the screws come off.
  • Slowly pull the side casing so it becomes dislocated from the top of the camera frame.

Remove two screws on the side where the battery is located.

Remove the lanyard loop after the screws come off.

Slowly pull the side casing so it becomes dislocated from the top of the camera frame.

Step 12

  • On the front of the camera near the flash flip the connector holding the ribbon.
  • Remove the ribbon from the connector.

On the front of the camera near the flash flip the connector holding the ribbon.

Remove the ribbon from the connector.

Step 13

  • Carefully remove the L shaped frame from the camera.
  • At the bottom of the camera the L shaped frame is being held in by two plastic bumps and a metal tab. Pop the frame off the bumps and tabs.
  • Note: There is a yellow and orange wire soldered onto the camera. Be careful not to pull them off.
  • The blue box is the speaker box.

Carefully remove the L shaped frame from the camera.

At the bottom of the camera the L shaped frame is being held in by two plastic bumps and a metal tab. Pop the frame off the bumps and tabs.

Note: There is a yellow and orange wire soldered onto the camera. Be careful not to pull them off.

The blue box is the speaker box.

Step 14

  • On the logic board next to the lens is a connector with a ribbon.
  • Flip the connector and remove the ribbon

On the logic board next to the lens is a connector with a ribbon.

Flip the connector and remove the ribbon

Step 15

  • Remove the frame on the back side of the camera where the LCD screen was.
  • Remove the two screws connecting the frame with the camera
  • Slowly pry off the frame from the camera
  • After removing the frame a plastic piece with two yellow button connections should fall off.
  • Note: This plastic piece is soldered to two wires a yellow and orange one.

Remove the frame on the back side of the camera where the LCD screen was.

Remove the two screws connecting the frame with the camera

Slowly pry off the frame from the camera

After removing the frame a plastic piece with two yellow button connections should fall off.

Note: This plastic piece is soldered to two wires a yellow and orange one.

Step 16

  • On the back of the camera where the LCD screen was, remove 3 screws located behind the lens.

On the back of the camera where the LCD screen was, remove 3 screws located behind the lens.

Step 17

  • Remove the large orange ribbon previously held in by screws from the camera.

Remove the large orange ribbon previously held in by screws from the camera.

Step 18

  • On the backside of the camera where the indicator lamp is located remove the two screws.

On the backside of the camera where the indicator lamp is located remove the two screws.

Step 19

  • On the side of the indicator lamp remove a screw.
  • On the front side of the indicator lamp remove the a screw.
  • This should remove the indicator lamp from the lens.

On the side of the indicator lamp remove a screw.

On the front side of the indicator lamp remove the a screw.

This should remove the indicator lamp from the lens.

Step 20

  • The lens is now detached from the camera except for the ribbon soldered onto the logic board.

The lens is now detached from the camera except for the ribbon soldered onto the logic board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 6 other contributors 


                    Ray

Member since: 01/25/2011

219 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Cal Poly, Team 4-38, Regan Winter 2011                        

                                                  Member of Cal Poly, Team 4-38, Regan Winter 2011 



                    CPSU-REGAN-W11S4G38                     


                                            4 Members                     


                                            13 Guides authored