Difficulty

Moderate

Steps

13

Time Required

Suggest a time??

Sections

1

  • Flash Assembly
  • 13 steps

Flags

4

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackCasio Exilim EX-Z850

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Flash Assembly
  • Remove the four screws on the side of the speaker.

Remove the four screws on the side of the speaker.

1024

Step 2

  • Remove the two back screws on the bottom of the camera.
  • Note: Bottom screws are longer than the top ones, so label accordingly for easy reassembly.

Remove the two back screws on the bottom of the camera.

Note: Bottom screws are longer than the top ones, so label accordingly for easy reassembly.

Step 3

  • Remove the four screws on the side opposite of the speaker.

Remove the four screws on the side opposite of the speaker.

Step 4

  • Once all screws have been removed, gently pry open bottom casing.
  • With tweezers, carefully remove ribbon from LCD screen.
  • Set bottom casing aside.

Once all screws have been removed, gently pry open bottom casing.

With tweezers, carefully remove ribbon from LCD screen.

Set bottom casing aside.

Step 5

  • Gently pry apart the top casing using tweezers.
  • Set the top casing aside.

Gently pry apart the top casing using tweezers.

Set the top casing aside.

Step 6

  • Use tweezers or prongs to pry the LCD screen off from the opening.
  • Note: The bottom of the LCD screen is attached to the frame by a few pieces of black tape.

Use tweezers or prongs to pry the LCD screen off from the opening.

Note: The bottom of the LCD screen is attached to the frame by a few pieces of black tape.

Step 7

  • Lift up the LCD screen, slowly move it to the other side.

Lift up the LCD screen, slowly move it to the other side.

Step 8

  • Pry off the LCD casing.

Pry off the LCD casing.

Step 9

  • Flip open the connector holding the ribbon.
  • Pull out the LCD screen with the ribbon from the camera.

Flip open the connector holding the ribbon.

Pull out the LCD screen with the ribbon from the camera.

Step 10

  • Remove two screws on the side where the battery is located.
  • Remove the lanyard loop after the screws come off.
  • Slowly pull the side casing so it becomes dislocated from the top of the camera frame.

Remove two screws on the side where the battery is located.

Remove the lanyard loop after the screws come off.

Slowly pull the side casing so it becomes dislocated from the top of the camera frame.

Step 11

  • On the front of the camera near the flash flip the connector holding the ribbon.
  • Remove the ribbon from the connector.

On the front of the camera near the flash flip the connector holding the ribbon.

Remove the ribbon from the connector.

Step 12

  • Carefully remove the L shaped frame from the camera.
  • At the bottom of the camera the L shaped frame is being held in by two plastic bumps and a metal tab.
  • Pop the frame off the bumps and tabs.
  • Note: There is a yellow and orange wire soldered onto the camera. Be careful not to pull them off.

Carefully remove the L shaped frame from the camera.

At the bottom of the camera the L shaped frame is being held in by two plastic bumps and a metal tab.

Pop the frame off the bumps and tabs.

Note: There is a yellow and orange wire soldered onto the camera. Be careful not to pull them off.

Step 13

  • This is the flash assembly.
  • It needs to be removed with soldering points circled.

This is the flash assembly.

It needs to be removed with soldering points circled.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Christian

Member since: 01/28/2011

320 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 4-38, Regan Winter 2011                        

                                                  Member of Cal Poly, Team 4-38, Regan Winter 2011 



                    CPSU-REGAN-W11S4G38                     


                                            4 Members                     


                                            13 Guides authored