Casio Dw 6900 Watchband Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          20 - 40 minutes            

Sections

1

• Watchband
• 6 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackWatch

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

There are no special requirements and hazards.

During the process, keep screws in a safe place

What you need

Step 1

              Watchband               

• There are four screws— two on each side of the watch case.
• Use the Philllips screwdriver to remove four 4.5 mm screws.

There are four screws— two on each side of the watch case.

Use the Philllips screwdriver to remove four 4.5 mm screws.

1024

Step 2

• There are two trunnions on both sides of the watch, and there are four grooves.
• Use a small flat-blade screwdriver and push inward to remove the trunnion. And remove the strap.

There are two trunnions on both sides of the watch, and there are four grooves.

Use a small flat-blade screwdriver and push inward to remove the trunnion. And remove the strap.

Step 3

• From the bottom of the watch, buckle the case from the main body of the watch by hand.

From the bottom of the watch, buckle the case from the main body of the watch by hand.

Step 4

• Align the hole on the side of the case with the button on the watch and put on the new watch case.

Align the hole on the side of the case with the button on the watch and put on the new watch case.

Step 5

• Thread the trunnion into the small hole on the strap.
• First, snap one side of the trunnion into the hole of the watch body.
• Use a flat-blade screwdriver to push the other end of the trunnion into the main body of the watch.

Thread the trunnion into the small hole on the strap.

First, snap one side of the trunnion into the hole of the watch body.

Use a flat-blade screwdriver to push the other end of the trunnion into the main body of the watch.

Step 6

• Screw on the four screws on both sides of the watch.

Screw on the four screws on both sides of the watch.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Shaoguang He                     

Member since: 05/10/2021

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team S66-G66, O'Regan Summer 2021                        

                                                  Member of York University, Team S66-G66, O'Regan Summer 2021 



                    YORK-O'REGAN-SU21S66G66                     


                                            1 Member                     


                                            1 Guide authored