Difficulty

Moderate

Steps

11

Time Required

                          10 - 15 minutes

Sections

2

  • Battery
  • 4 steps
  • Touch Screen
  • 7 steps

Flags

4

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackCasio Cassiopeia E-125

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the device over to the back side.

Flip the device over to the back side.

1024

Step 2

  • Slide the small switch on the back to “MAIN”.

Slide the small switch on the back to “MAIN”.

Step 3

  • Slide the battery cover downwards.
  • Pull off the battery cover.

Slide the battery cover downwards.

Pull off the battery cover.

Step 4

  • Pull the black tab to remove the battery.

Pull the black tab to remove the battery.

Step 5

              Touch Screen
  • Use the Phillips #00 screwdriver to remove the two screws near the top of the device.

Use the Phillips #00 screwdriver to remove the two screws near the top of the device.

Step 6

  • Use the Phillips #00 screwdriver to remove the two screws located inside the battery compartment.

Use the Phillips #00 screwdriver to remove the two screws located inside the battery compartment.

Step 7

  • Use a spudger or opening tool to separate the two halves of the case.

Use a spudger or opening tool to separate the two halves of the case.

Step 8

  • Pry the two halves of the case apart with the opening tool.

Pry the two halves of the case apart with the opening tool.

Step 9

  • Potential for device damage. Do not pull apart the wires connecting the outer case.
  • Lay the two halves of the outer case next to the central components as shown.

Potential for device damage. Do not pull apart the wires connecting the outer case.

Lay the two halves of the outer case next to the central components as shown.

Step 10

  • Use the Philips #00 screwdriver to remove the three screws in the corners of the screen.

Use the Philips #00 screwdriver to remove the three screws in the corners of the screen.

Step 11

  • Lift the tab on the motherboard and pull out the ribbon cable.
  • After the ribbon cable is detached from the motherboard, the touch screen is completely separated from the device.

Lift the tab on the motherboard and pull out the ribbon cable.

After the ribbon cable is detached from the motherboard, the touch screen is completely separated from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Ryan Fernandez

Member since: 04/03/2012

47 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Cal Poly, Team 5-4, Forte Spring 2012                        

                                                  Member of Cal Poly, Team 5-4, Forte Spring 2012 



                    CPSU-FORTE-S12S5G4                     


                                            6 Members                     


                                            5 Guides authored