Difficulty

Moderate

Steps

9

Time Required

                          15 - 25 minutes

Sections

1

  • Battery
  • 9 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackWatch

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

When watches die, most of the time they are thrown away, lost in the junk drawer or even worse, end up in a landfill where its components can potentially contaminate the soil and be horrible for the environment!

This is usually because most watch owners don’t know how to change the battery or are too misguided on the complexity of the process when in reality it’s very simple and can be done with common household tools and in no more than 15 minutes!

What you need

Step 1

              Battery
  • Using the Phillips #00 screwdriver, remove the four screws from the back panel of the watch.

Using the Phillips #00 screwdriver, remove the four screws from the back panel of the watch.

1024

Step 2

  • With your fingers, or tweezers if available, remove the rubber gasket surrounding the base of the watch.

With your fingers, or tweezers if available, remove the rubber gasket surrounding the base of the watch.

Step 3

  • Carefully remove the centerpiece of the watch from the casing.

Carefully remove the centerpiece of the watch from the casing.

Step 4

  • Using the Flathead screwdriver, push the four tabs located around the centerpiece inwards to open it up.

Using the Flathead screwdriver, push the four tabs located around the centerpiece inwards to open it up.

Step 5

  • Open up the centerpiece to reveal the battery.
  • Carefully remove the dead battery.

Open up the centerpiece to reveal the battery.

Carefully remove the dead battery.

Step 6

  • Insert the new Cr2016 3V Lithium battery into the centerpiece.
  • Reattach the back of the centerpiece together.

Insert the new Cr2016 3V Lithium battery into the centerpiece.

Reattach the back of the centerpiece together.

Step 7

  • Insert the centerpiece back into the casing of the watch with the “front” facing down.
  • Position the rubber gasket back into place.

Insert the centerpiece back into the casing of the watch with the “front” facing down.

Position the rubber gasket back into place.

Step 8

  • After putting the back panel of the watch into place, use the Phillips #00 screwdriver to screw four screws into place.

After putting the back panel of the watch into place, use the Phillips #00 screwdriver to screw four screws into place.

Step 9

  • Finally, reset the Casio watch to the correct time.
  • Make sure all buttons are operational.

Finally, reset the Casio watch to the correct time.

Make sure all buttons are operational.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Libaan Major

Member since: 09/10/2021

193 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       York University, Team 1-12, O'Regan Fall 2021                        

                                                  Member of York University, Team 1-12, O'Regan Fall 2021 



                    YORK-O'REGAN-F21S1G12                     


                                            1 Member                     


                                            1 Guide authored