Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Fellowes T7CM Casing and Trigger Replacement
- 4 steps
Flags
0
BackFellowes T7CM
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Fellowes T7CM Casing and Trigger Replacement
- Check to make sure the shredder is not plugged in to any electrical outlet.
- Remove the shredder from the catch basket and place the silver side down on a flat surface.
- Place the catch basket aside as you will not be needing it for the rest of the disassembly.
Check to make sure the shredder is not plugged in to any electrical outlet.
Remove the shredder from the catch basket and place the silver side down on a flat surface.
Place the catch basket aside as you will not be needing it for the rest of the disassembly.
1024
Step 2
- Flip the shredder silver side down and place on a flat even surface.
- Remove the manufacturer’s label in order to gain access to the hidden screw hole.
- Locate all five of the case screws and remove them with a Phillips-Head screwdriver. The screws are located within the five marked circles in the photo. The size of the screws are 18 mm in length and head diameter of 5 mm.
Flip the shredder silver side down and place on a flat even surface.
Remove the manufacturer’s label in order to gain access to the hidden screw hole.
Locate all five of the case screws and remove them with a Phillips-Head screwdriver. The screws are located within the five marked circles in the photo. The size of the screws are 18 mm in length and head diameter of 5 mm.
Step 3
- Once all of the screws are removed, slowly pull apart the casing.
- If the casing is not separating, gently wiggle the top part of the casing from the bottom part of the casing.
- Use Caution during this procedure to prevent from damaging any of the internal parts.
Once all of the screws are removed, slowly pull apart the casing.
If the casing is not separating, gently wiggle the top part of the casing from the bottom part of the casing.
Use Caution during this procedure to prevent from damaging any of the internal parts.
Step 4
- Open the casing as shown to prevent tangling or damaging the wires.
- Take note to how the trigger assembly is attached before removal.
- The trigger assembly is one part and should come off all together with little to no force applied.
- Remove the trigger assembly.
Open the casing as shown to prevent tangling or damaging the wires.
Take note to how the trigger assembly is attached before removal.
The trigger assembly is one part and should come off all together with little to no force applied.
Remove the trigger assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 4 other contributors
John Wisthoff
Member since: 10/12/2016
487 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
IUPUI, Team 2-2, Baechle Fall 2016
Member of IUPUI, Team 2-2, Baechle Fall 2016
IUPUI-BAECHLE-F16S2G2
4 Members
16 Guides authored
Deanna Jack - Nov 28, 2016
Reply
-Group 1 Recommendations-
Use Caution - Should use the ‘Caution’ bullet. (Click on the bullet to change bullets)
Take note - Should use the ‘Note’ bullet.
Second to last bullet on the last step - Should be a note because it is not stating a step, it is a note or reminder for the user.
indymoon - Feb 17, 2018
Reply
Where can i buy replacement gears for this shredder?
