Difficulty
Difficult
Steps
13
Time Required
20 minutes
Sections
3
- Battery
- 2 steps
- Casdon Dyson Ball Disassembly
- 5 steps
- Ball Motor
- 6 steps
Flags
0
BackCasdon Dyson Ball
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove one 9.2mm (0.36 in) screw using the PH00 screwdriver.
- Remove the battery cover by pulling it away from the vacuum once the 9.2mm (0.36 in) screw is removed.
Remove one 9.2mm (0.36 in) screw using the PH00 screwdriver.
Remove the battery cover by pulling it away from the vacuum once the 9.2mm (0.36 in) screw is removed.
1024
Step 2
- Remove batteries from the vacuum by pulling them out and away from the vacuum.
Remove batteries from the vacuum by pulling them out and away from the vacuum.
Step 3
Casdon Dyson Ball Disassembly
- Remove all seven 9.2mm (0.32 in) screws on the back of the vacuum.
Remove all seven 9.2mm (0.32 in) screws on the back of the vacuum.
Step 4
- Remove the front side covers by pulling them away from the vacuum.
Remove the front side covers by pulling them away from the vacuum.
Step 5
- Separate the battery compartment from the ball and bead cylinder by sliding the vacuum ball away from the battery compartment.
Separate the battery compartment from the ball and bead cylinder by sliding the vacuum ball away from the battery compartment.
Step 6
- Separate the bead cylinder and the fan compartment by pulling the bead cylinder away from the fan compartment.
Separate the bead cylinder and the fan compartment by pulling the bead cylinder away from the fan compartment.
Step 7
- Remove beads from the container.
Remove beads from the container.
Step 8
Ball Motor
- Remove the three 11.5mm (0.45 in) screws at bottom of bead cylinder container using the PH00 screwdriver.
Remove the three 11.5mm (0.45 in) screws at bottom of bead cylinder container using the PH00 screwdriver.
Step 9
- Remove the bead cylinder and motor mount from the vacuum ball.
Remove the bead cylinder and motor mount from the vacuum ball.
Step 10
- Separate the motor mount from the bead cylinder by pulling the motor mount away from the bead cylinder.
Separate the motor mount from the bead cylinder by pulling the motor mount away from the bead cylinder.
Step 11
- Separate the fan from the motor shaft by pulling the fan away from the motor.
Separate the fan from the motor shaft by pulling the fan away from the motor.
Step 12
- Cut the wires to the faulty motor using wire cutters.
Cut the wires to the faulty motor using wire cutters.
Step 13
- Remove and replace the faulty ball motor with a new one.
- Solder the new ball motor’s wires to the vacuum’s wires which were previously cut.
Remove and replace the faulty ball motor with a new one.
Solder the new ball motor’s wires to the vacuum’s wires which were previously cut.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Seldon Price
Member since: 11/07/2017
612 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
IUPUI, Team S3-G5, Harley Fall 2017
Member of IUPUI, Team S3-G5, Harley Fall 2017
IUPUI-HARLEY-F17S3G5
3 Members
5 Guides authored
Garrett - Feb 12, 2022
Reply
Thank you for the guide, it helped me successfully repair the top motor that stirs the colored pellets. My son will be so happy to see it working again!
