Difficulty
Easy
Steps
2
Time Required
15 seconds
Sections
1
- Rotor Blade
- 2 steps
Flags
0
BackCarrera Mario Copter
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rotor Blade
- Using the JIS #00 screwdriver, hold the rotor blade still and unscrew the 4.762mm screw in the center of the blade.
Using the JIS #00 screwdriver, hold the rotor blade still and unscrew the 4.762mm screw in the center of the blade.
1024
Step 2
- Lift the screw out and set it aside.
- Lift the rotor blade out.
- Be sure to place the rotor blades properly for stable flight. With the quadrocopter facing you, the front rotor blades should be red with blade A on the right and B on the left. The rear rotor blades should be blue with blade B on the right and A on the left.
Lift the screw out and set it aside.
Lift the rotor blade out.
Be sure to place the rotor blades properly for stable flight. With the quadrocopter facing you, the front rotor blades should be red with blade A on the right and B on the left. The rear rotor blades should be blue with blade B on the right and A on the left.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Marissa Espino
Member since: 10/23/2017
101 Reputation
1 Guide authored
Badges:
2
Team
UW Tacoma, Team S1-G6, Rose Fall 2017
Member of UW Tacoma, Team S1-G6, Rose Fall 2017
UWT-ROSE-F17S1G6
4 Members
5 Guides authored
Ainul Abd Rahim - Oct 10, 2020
Reply
Hi. How i can buy the rotor blade
