Carrera Mario Copter Motherboard Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          45 minutes

Sections

Battery
3 steps
Motherboard
3 steps

Flags

BackCarrera Mario Copter
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Flip the quadrocopter over so that the underside of the device is facing up.
Unplug the battery cable from the socket on the quadrocopter.

Flip the quadrocopter over so that the underside of the device is facing up.

Unplug the battery cable from the socket on the quadrocopter.

1024

Step 2

Push the battery upward with your thumbs to loosen it from the tight slot until your thumbs can not reach the bottom of the battery anymore.

Push the battery upward with your thumbs to loosen it from the tight slot until your thumbs can not reach the bottom of the battery anymore.

Step 3

Pull the battery away from the slot to remove it.

Pull the battery away from the slot to remove it.

Step 4

              Motherboard

Using the Phillips # PH00 screwdriver unscrew the four 7.1mm screws in the black circle base.
Remove the entire black circle base and flip it over so you can see the motherboard.

Using the Phillips # PH00 screwdriver unscrew the four 7.1mm screws in the black circle base.

Remove the entire black circle base and flip it over so you can see the motherboard.

Step 5

Using tweezers remove the four white heads wires from the motherboard.
Be careful not to cut the wires plugged to the little white heads. Grab onto the plastic connectors if possible.

Using tweezers remove the four white heads wires from the motherboard.

Be careful not to cut the wires plugged to the little white heads. Grab onto the plastic connectors if possible.

Step 6

Using the tweezers remove the golden head screws that hold down the motherboard.
Hold strong the motherboard and pull up strong the head screws.
Be careful not to hurt yourself. You will need to try several times to remove those.

Using the tweezers remove the golden head screws that hold down the motherboard.

Hold strong the motherboard and pull up strong the head screws.

Be careful not to hurt yourself. You will need to try several times to remove those.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Stephany Martinez

Member since: 10/23/2017

122 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UW Tacoma, Team S1-G6, Rose Fall 2017                        

                                                  Member of UW Tacoma, Team S1-G6, Rose Fall 2017 



                    UWT-ROSE-F17S1G6                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team