Difficulty
Easy
Steps
2
Time Required
10 minutes
Sections
1
- Carburetor Disassembly
- 2 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackBriggs and Stratton 5.5HP 123k02-0239-E1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove air filter + housing
- Use a 5/16 socket or flat head screwdriver to remove the first bolt. Pull the cover off and remove the air filter.
- Remove the 3 bolts using a 5/16 socket. In addition, pull the breather hose off the assembly at the bottom left. Now pull the cover off.
Use a 5/16 socket or flat head screwdriver to remove the first bolt. Pull the cover off and remove the air filter.
Remove the 3 bolts using a 5/16 socket. In addition, pull the breather hose off the assembly at the bottom left. Now pull the cover off.
1024
Step 2
Remove carburetor
- Remove the two bolts holding the carburetor to the engine with a 3/8 socket or wrench.
- Remove the spring boxed in red from the hole. Pull to left of carburetor, towards the link the other end of the spring is around.
- The link will be connected to the carburetor. Pull the carburetor off in an “S” motion and remove it.
Remove the two bolts holding the carburetor to the engine with a 3/8 socket or wrench.
Remove the spring boxed in red from the hole. Pull to left of carburetor, towards the link the other end of the spring is around.
The link will be connected to the carburetor. Pull the carburetor off in an “S” motion and remove it.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Jacob Micallef
Member since: 03/06/2017
993 Reputation
7 Guides authored
Badges:
17
+14 more badges