Difficulty
Moderate
Steps
7
Time Required
Suggest a time??
Sections
1
- Carbon brushes
- 7 steps
Flags
0
BackRéparation Perforateur Dexter Power SDS Plus - 1500W
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Safety warning
- Before working on the device, make sure it is disconnected from the mains.
Before working on the device, make sure it is disconnected from the mains.
1024
Step 2
The tools needed
- Flat screwdriver
- Pliers
Flat screwdriver
Pliers
Step 3
Locate the carbon brushes
- Locate the carbon brushes on both sides.
Locate the carbon brushes on both sides.
Step 4
Disassembly
- Unscrew the carbon brush recess cover.
Unscrew the carbon brush recess cover.
Step 5
Removal of the carbon brushes
- Remove the carbon brushes using pliers.
Remove the carbon brushes using pliers.
Step 6
Carbon brush replacement
- Be careful to align the carbon brush guide lug in the well
- Replace the carbon brush recess cover and screw it down.
Be careful to align the carbon brush guide lug in the well
Replace the carbon brush recess cover and screw it down.
Step 7
Replacement of the second carbon brush
- Repeat the same previous operation on the other side.
Repeat the same previous operation on the other side.
Cancel: I did not complete this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Annika Faelker
HelloMacOS
Author
with 1 other contributor
iRobot
Member since: 09/24/2009
1 Reputation
646 Guides authored
Badges:
36
+33 more badges
