Capresso Perfectea 260 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          15 - 20 minutes            

Sections

1

• Motherboard
• 6 steps

Flags

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

• BackCapresso Perfectea 260

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• First, take the base of the device and flip it over.

First, take the base of the device and flip it over.

1024

Step 2

• Remove the four 12 mm Phillips #2 screws surrounding the base then lift the bottom half of the base to expose the circuit boards inside the device.

Remove the four 12 mm Phillips #2 screws surrounding the base then lift the bottom half of the base to expose the circuit boards inside the device.

Step 3

• Remove the two 7.5 mm Phillips #2 screws holding in the motherboard

Remove the two 7.5 mm Phillips #2 screws holding in the motherboard

Step 4

• Unplug the wire going into the side of the motherboard

Unplug the wire going into the side of the motherboard

Step 5

• Use the metal spudger to cut open the rubber covering the latch where it clamps onto the copper tab.
• Unplug wire at heating element by first using the metal spudger to push the latch in and then pushing it out.
• Be careful when unplugging the wire as if it is done too forcefully it can damage the connection and make it difficult to connect a new motherboard

Use the metal spudger to cut open the rubber covering the latch where it clamps onto the copper tab.

Unplug wire at heating element by first using the metal spudger to push the latch in and then pushing it out.

Be careful when unplugging the wire as if it is done too forcefully it can damage the connection and make it difficult to connect a new motherboard

Step 6

• Lift the motherboard out of the device

Lift the motherboard out of the device

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Rohin Chander                     

Member since: 04/14/2015

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Cal Poly, Team 6-17, Maness Spring 2015                        

                                                  Member of Cal Poly, Team 6-17, Maness Spring 2015 



                    CPSU-MANESS-S15S6G17                     


                                            4 Members                     


                                            6 Guides authored