Difficulty

Easy

Steps

8

Time Required

                          15 minutes

Sections

1

  • Metal Outside Casing
  • 8 steps

Flags

0

  • BackCapresso Infinity

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Metal Outside Casing
  • Twist the top plastic container to the left counterclockwise.
  • Pull upwards to remove.

Twist the top plastic container to the left counterclockwise.

Pull upwards to remove.

1024

Step 2

  • Twist the top burr to the left counter clockwise.
  • Pull upwards to remove.

Twist the top burr to the left counter clockwise.

Step 3

  • Flip entire device upside down.
  • Remove two rubber coverings on the back of the device.

Flip entire device upside down.

Remove two rubber coverings on the back of the device.

Step 4

  • Remove four 11.59mm T10 screws.
  • The screws will have small circular washers under them. Put them aside for reassembly.

Remove four 11.59mm T10 screws.

The screws will have small circular washers under them. Put them aside for reassembly.

Step 5

  • Lift the metal outside casing off the black base.
  • Flip the outside casing forward so you have access to the inside of it.

Lift the metal outside casing off the black base.

Flip the outside casing forward so you have access to the inside of it.

Step 6

  • Remove one 11.59mm T10 screw.
  • Let the green wire fall, or place somewhere so it doesn’t get in the way.
  • There will be a small metal retainer and washer, put them aside for reassembly.

Remove one 11.59mm T10 screw.

Let the green wire fall, or place somewhere so it doesn’t get in the way.

There will be a small metal retainer and washer, put them aside for reassembly.

Step 7

  • Remove two 11.59mm T10 screws.

Remove two 11.59mm T10 screws.

Step 8

  • Remove the time/on switch by pulling upwards.

Remove the time/on switch by pulling upwards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Nina Mackin

Member since: 10/09/2018

447 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team S1-G1, Leahy Fall 2018                        

                                                  Member of USF Tampa, Team S1-G1, Leahy Fall 2018 



                    USFT-LEAHY-F18S1G1                     


                                            4 Members                     


                                            5 Guides authored