Difficulty
Moderate
Steps
11
Time Required
30 - 35 minutes
Sections
2
- Front Panel
- 7 steps
- Speaker
- 4 steps
Flags
1
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackCanon ZR70MC
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Panel
- Unscrew the 3.35mm screw.
Unscrew the 3.35mm screw.
1024
Step 2
- Turn the ZR70MC so that you can see the bottom of the camcorder.
- Unscrew the 3.35 mm located in the top left portion of the camera.
Turn the ZR70MC so that you can see the bottom of the camcorder.
Unscrew the 3.35 mm located in the top left portion of the camera.
Step 3
- Turn the camera on the side and remove the cover for the audio inputs. There is a 2.65 mm screw located behind the cover.
- Remove the 2.65 mm screw.
Turn the camera on the side and remove the cover for the audio inputs. There is a 2.65 mm screw located behind the cover.
Remove the 2.65 mm screw.
Step 4
- Remove the cover located on the front of the camcorder and remove the cover by pulling on the bottom groove.
- Locate and remove the two 3.35 mm screws.
Remove the cover located on the front of the camcorder and remove the cover by pulling on the bottom groove.
Locate and remove the two 3.35 mm screws.
Step 5
- Turn the camcorder so that the bottom is facing up and open the tape cassette compartment.
- There is one 3.35 mm screw located under the tape cassette panel on the front left side of the camcorder. Remove the screw.
Turn the camcorder so that the bottom is facing up and open the tape cassette compartment.
There is one 3.35 mm screw located under the tape cassette panel on the front left side of the camcorder. Remove the screw.
Step 6
- Now that all of the screws are removed, remove the front panel by gently pulling on the front panel.
- The speaker will be connected to the main body by a wire. Be careful not to damage this wire.
Now that all of the screws are removed, remove the front panel by gently pulling on the front panel.
The speaker will be connected to the main body by a wire. Be careful not to damage this wire.
Step 7
- Use tweezers to gently pull the speaker wire from the main body of the camcorder.
- Pull the front panel completely away from the main body of the camcorder.
Use tweezers to gently pull the speaker wire from the main body of the camcorder.
Pull the front panel completely away from the main body of the camcorder.
Step 8
Speaker
- Take the front panel and remove the three 2.75 mm screws from the metal plate.
Take the front panel and remove the three 2.75 mm screws from the metal plate.
Step 9
- Remove the metal plate. This metal plate protects the black speaker holder.
Remove the metal plate. This metal plate protects the black speaker holder.
Step 10
- Remove the black speaker holder from the front panel. This holds the individual speakers.
Remove the black speaker holder from the front panel. This holds the individual speakers.
Step 11
- Remove the individual speakers from the black speaker holder.
Remove the individual speakers from the black speaker holder.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
khalid clarke
Member since: 09/26/2017
728 Reputation
7 Guides authored
Badges:
7
+4 more badges
Team
USF Tampa, Team S13-G2, Boczar Fall 2017
Member of USF Tampa, Team S13-G2, Boczar Fall 2017
USFT-BOCZAR-F17S13G2
3 Members
14 Guides authored
