Difficulty

Moderate

Steps

12

Time Required

                          15 minutes

Sections

2

  • Front Panel
  • 7 steps
  • Side Panel
  • 5 steps

Flags

1

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackCanon ZR70MC

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Panel
  • Unscrew the 3.35mm screw.

Unscrew the 3.35mm screw.

1024

Step 2

  • Turn the ZR70MC so that you can see the bottom of the camcorder.
  • Unscrew the 3.35 mm located in the top left portion of the camera.

Turn the ZR70MC so that you can see the bottom of the camcorder.

Unscrew the 3.35 mm located in the top left portion of the camera.

Step 3

  • Turn the camera on the side and remove the cover for the audio inputs. There is a 2.65 mm screw located behind the cover.
  • Remove the 2.65 mm screw.

Turn the camera on the side and remove the cover for the audio inputs. There is a 2.65 mm screw located behind the cover.

Remove the 2.65 mm screw.

Step 4

  • Remove the cover located on the front of the camcorder and remove the cover by pulling on the bottom groove.
  • Locate and remove the two 3.35 mm screws.

Remove the cover located on the front of the camcorder and remove the cover by pulling on the bottom groove.

Locate and remove the two 3.35 mm screws.

Step 5

  • Turn the camcorder so that the bottom is facing up and open the tape cassette compartment.
  • There is one 3.35 mm screw located under the tape cassette panel on the front left side of the camcorder. Remove the screw.

Turn the camcorder so that the bottom is facing up and open the tape cassette compartment.

There is one 3.35 mm screw located under the tape cassette panel on the front left side of the camcorder. Remove the screw.

Step 6

  • Now that all of the screws are removed, remove the front panel by gently pulling on the front panel.
  • The speaker will be connected to the main body by a wire. Be careful not to damage this wire.

Now that all of the screws are removed, remove the front panel by gently pulling on the front panel.

The speaker will be connected to the main body by a wire. Be careful not to damage this wire.

Step 7

  • Use tweezers to gently pull the speaker wire from the main body of the camcorder.
  • Pull the front panel completely away from the main body of the camcorder.

Use tweezers to gently pull the speaker wire from the main body of the camcorder.

Pull the front panel completely away from the main body of the camcorder.

Step 8

              Side Panel
  • Remove all 3.75 mm screws from the bottom of the camcorder.

Remove all 3.75 mm screws from the bottom of the camcorder.

Step 9

  • Turn the camcorder so that the back is facing you.
  • Remove the 3.75 mm screws from the back of the camcorder that hold the side panel in place.

Turn the camcorder so that the back is facing you.

Remove the 3.75 mm screws from the back of the camcorder that hold the side panel in place.

Step 10

  • Now that all of the screws are removed, gently pull off the side panel of the camcorder.

Now that all of the screws are removed, gently pull off the side panel of the camcorder.

Step 11

  • Gently pull the two black wires from their connections. These black wires are the only thing left connecting the side panel to the main body of the camcorder.

Gently pull the two black wires from their connections. These black wires are the only thing left connecting the side panel to the main body of the camcorder.

Step 12

  • Gently pull the orange films out of their connections. This will allow you access to all components of the main body.

Gently pull the orange films out of their connections. This will allow you access to all components of the main body.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    khalid clarke

Member since: 09/26/2017

728 Reputation

                                      7 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team S13-G2, Boczar Fall 2017                        

                                                  Member of USF Tampa, Team S13-G2, Boczar Fall 2017 



                    USFT-BOCZAR-F17S13G2                     


                                            3 Members                     


                                            14 Guides authored

Cedee Nunnil Gampal - Sep 27, 2019

Reply

How to fix the start/stop button when it doesn’t responding.