Canon Vixia Hf S10 Camcorder Power Button Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          15 - 30 minutes            

Sections

1

• Power Button
• 11 steps

Flags

2

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackCanon Vixia HF S10

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Power Button               

• Turn the camcorder upside down and remove the three 3x4 mm Phillips screws securing the black plastic case.

Turn the camcorder upside down and remove the three 3x4 mm Phillips screws securing the black plastic case.

1024

Step 2

• Flip open the LCD screen.
• Remove the three 3x4 mm Phillips screws securing the black panel plastic case.
• From the inner corner in between the panel and the LCD screen, remove the two 2x2.5 mm Phillips screws and the 3x4 mm Phillips screw.

Flip open the LCD screen.

Remove the three 3x4 mm Phillips screws securing the black panel plastic case.

From the inner corner in between the panel and the LCD screen, remove the two 2x2.5 mm Phillips screws and the 3x4 mm Phillips screw.

Step 3

• Remove the black plastic covering with your fingers. Underneath the covering, you will find a screw hinge.
• Remove the 2x2.25 mm Phillips screw located at the top of the screw hinge.

Remove the black plastic covering with your fingers. Underneath the covering, you will find a screw hinge.

Remove the 2x2.25 mm Phillips screw located at the top of the screw hinge.

Step 4

• Using your fingers remove the panel from the base of the camcorder.
• Once panel is off, remove the two 1x2.5 mm Phillips screws.

Using your fingers remove the panel from the base of the camcorder.

Once panel is off, remove the two 1x2.5 mm Phillips screws.

Step 5

• Turn the camcorder upside down and remove the four 2x2.25 mm Phillips screws.

Turn the camcorder upside down and remove the four 2x2.25 mm Phillips screws.

Step 6

• Turn the camcorder to the side and remove the strap.
• Remove the two 1x2.5 mm Phillips screws.

Turn the camcorder to the side and remove the strap.

Remove the two 1x2.5 mm Phillips screws.

Step 7

• Using a plastic opening tool, pry off the side panel from the base of the camcorder.
• Remove the two 2x2.5mm Phillips screws located at the top

Using a plastic opening tool, pry off the side panel from the base of the camcorder.

Remove the two 2x2.5mm Phillips screws located at the top

Step 8

• Remove the two 3x4 mm Phillips screws beneath the two covers (AV & DCIN).

Remove the two 3x4 mm Phillips screws beneath the two covers (AV & DCIN).

Step 9

• Slide open the “Optical Image Stabilizer” cover located at the top of the camcorder.
• Remove the four 3x2.5 mm Phillips screws.
• Using your fingers, remove the metal casing.

Slide open the “Optical Image Stabilizer” cover located at the top of the camcorder.

Remove the four 3x2.5 mm Phillips screws.

Using your fingers, remove the metal casing.

Step 10

• Using your fingers pop off the top cover of the camcorder.
• Remove the four Phillips screws located underneath the top cover..; three 3x4 mm Phillips screws and one 2x2.5 mm Phillips screw.
• Remove the two 3x2.5 mm Phillips screws from the metal casing located underneath the top cover.

Using your fingers pop off the top cover of the camcorder.

Remove the four Phillips screws located underneath the top cover..; three 3x4 mm Phillips screws and one 2x2.5 mm Phillips screw.

Remove the two 3x2.5 mm Phillips screws from the metal casing located underneath the top cover.

Step 11

• Using your fingers, slightly move the metal casing.
• Remove the power button.

Using your fingers, slightly move the metal casing.

Remove the power button.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Olivia                     

Member since: 03/03/2015

343 Reputation

                                      2 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges                           

Team

                       Sam Houston State, Team 13-1, Blackburne Winter 2015                        

                                                  Member of Sam Houston State, Team 13-1, Blackburne Winter 2015 



                    SHSU-BLACKBURNE-W15S13G1                     


                                            4 Members                     


                                            9 Guides authored