Difficulty

Moderate

Steps

10

Time Required

                          30 - 40 minutes

Sections

1

  • Mini Advance Shoe
  • 10 steps

Flags

2

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackCanon Vixia HF S10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Mini Advance Shoe
  • Flip the camcorder upside down and remove the three 3x4 mm Phillips screws highlighted in the diagram.

Flip the camcorder upside down and remove the three 3x4 mm Phillips screws highlighted in the diagram.

1024

Step 2

  • Open the LCD screen.
  • Remove the three 3x4 mm Phillips screws securing the black panel plastic case.
  • From the inner corner in between the panel and the LCD screen, remove the two 2x2.5 mm Phillips screws and the 3x4 mm Phillips screw.

Open the LCD screen.

Remove the three 3x4 mm Phillips screws securing the black panel plastic case.

From the inner corner in between the panel and the LCD screen, remove the two 2x2.5 mm Phillips screws and the 3x4 mm Phillips screw.

Step 3

  • With the canon logo facing you, remove the plastic casing located in the back of the lens. Underneath this casing, you will find a hinge with a screw.
  • Remove the 2x2.5 mm Phillips screw holding hinge in place.

With the canon logo facing you, remove the plastic casing located in the back of the lens. Underneath this casing, you will find a hinge with a screw.

Remove the 2x2.5 mm Phillips screw holding hinge in place.

Step 4

  • Using your hands, remove the inside panel.
  • After removing the panel, remove the two 1x2.5 mm Phillips screws.

Using your hands, remove the inside panel.

After removing the panel, remove the two 1x2.5 mm Phillips screws.

Step 5

  • Turn the camcorder back to step one position and remove remaining screws on the bottom platform. There will be four 2x2.5 mm Phillips screws.

Turn the camcorder back to step one position and remove remaining screws on the bottom platform. There will be four 2x2.5 mm Phillips screws.

Step 6

  • Remove the strap from mount.
  • Remove the two 1x2.5 mm Phillips screws revealed under the strap on the side panel.

Remove the strap from mount.

Remove the two 1x2.5 mm Phillips screws revealed under the strap on the side panel.

Step 7

  • Pry the side panel from the base of the camcorder by using the plastic opening tool.
  • Remove the two 2x2.5mm Phillips screws located at the top.

Pry the side panel from the base of the camcorder by using the plastic opening tool.

Remove the two 2x2.5mm Phillips screws located at the top.

Step 8

  • Remove the two 3x4 mm Phillips screws located under the coverings labeled AV & DCIN. These covers can be found when the back of the camera is facing you.

Remove the two 3x4 mm Phillips screws located under the coverings labeled AV & DCIN. These covers can be found when the back of the camera is facing you.

Step 9

  • Slide open the “Optical Image Stabilizer” cover located at the top of the camcorder.
  • Remove the four 3x2.5 mm Phillips screws underneath.
  • Using your fingers, remove the metal casing.

Slide open the “Optical Image Stabilizer” cover located at the top of the camcorder.

Remove the four 3x2.5 mm Phillips screws underneath.

Using your fingers, remove the metal casing.

Step 10

  • Lift the top cover of the camcorder using your fingers.
  • Remove the the Mini Advance Shoe with your fingers

Lift the top cover of the camcorder using your fingers.

Remove the the Mini Advance Shoe with your fingers

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Attached Documents

  • VIXIA_HFS10_HFS100_IM_N_EN.pdf
  • PDF - 3.97 mb
  • View

VIXIA_HFS10_HFS100_IM_N_EN.pdf

PDF - 3.97 mb

Author

                                      with 4 other contributors 


                    Briana

Member since: 03/03/2015

116 Reputation

                                      1 Guide authored                  



                       Badges:
                       4





                                                        +1 more badge

Team

                       Sam Houston State, Team 13-1, Blackburne Winter 2015                        

                                                  Member of Sam Houston State, Team 13-1, Blackburne Winter 2015 



                    SHSU-BLACKBURNE-W15S13G1                     


                                            4 Members                     


                                            9 Guides authored