Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

  • Audio
  • 3 steps

Flags

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackCanon Vixia HF S10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Audio
  • Turn the camcorder upside down and remove the three 3x4 mm Phillips screws securing the black plastic case.
  • Flip open the LCD screen.
  • Remove the three 3x4 mm Phillips screws securing the black panel plastic case.

Turn the camcorder upside down and remove the three 3x4 mm Phillips screws securing the black plastic case.

Flip open the LCD screen.

Remove the three 3x4 mm Phillips screws securing the black panel plastic case.

1024

Step 2

  • From the inner corner in between the panel and the LCD screen, remove the two 2x2.5 mm Phillips screws and the 3x4 mm Phillips screw.
  • Remove the black plastic covering with your fingers. Underneath the covering, you will find a screw hinge.
  • Remove the 2x2.25 mm Phillips screw located at the top of the screw hinge.

From the inner corner in between the panel and the LCD screen, remove the two 2x2.5 mm Phillips screws and the 3x4 mm Phillips screw.

Remove the black plastic covering with your fingers. Underneath the covering, you will find a screw hinge.

Remove the 2x2.25 mm Phillips screw located at the top of the screw hinge.

Step 3

  • Using your fingers, remove the panel from the base of the camcorder.
  • After removing the panel, remove the two 2x2.25 mm Phillips screws located at the top right of the inside of the panel.
  • Using one hand, gently move the silver piece holding the speaker down while using the other hand to remove the speaker.

Using your fingers, remove the panel from the base of the camcorder.

After removing the panel, remove the two 2x2.25 mm Phillips screws located at the top right of the inside of the panel.

Using one hand, gently move the silver piece holding the speaker down while using the other hand to remove the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Clint

Member since: 03/03/2015

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Sam Houston State, Team 13-1, Blackburne Winter 2015                        

                                                  Member of Sam Houston State, Team 13-1, Blackburne Winter 2015 



                    SHSU-BLACKBURNE-W15S13G1                     


                                            4 Members                     


                                            9 Guides authored