Canon Vixia Hf R62 Outer Casing Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          3 - 5 minutes

Sections

Outer Shell
9 steps

Flags

BackCanon Vixia HF R62
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Outer Shell

Remove the strap by undoing the Velcro and pulling it through the thread points.
Remove the external battery pack by pressing down on the slide release and sliding it out.

Remove the strap by undoing the Velcro and pulling it through the thread points.

Remove the external battery pack by pressing down on the slide release and sliding it out.

1024

Step 2

Remove the three 5mm Phillips #000 screws on the bottom of the device.

Remove the three 5mm Phillips #000 screws on the bottom of the device.

Step 3

On the side of the device, remove the following Phillips #000 screws:
One 3mm screw
One 5mm screw

On the side of the device, remove the following Phillips #000 screws:

One 3mm screw

One 5mm screw

Step 4

Remove the panel opposite the display by pulling up perpendicular to the side.

Remove the panel opposite the display by pulling up perpendicular to the side.

Step 5

Remove the 4mm Phillips #000 screw that was exposed after taking off the side panel.

Remove the 4mm Phillips #000 screw that was exposed after taking off the side panel.

Step 6

Remove the three 4mm Phillips #000 screws shown.
There will be foam covers protecting some or all of these screws. These will need to be removed before you will be able to unscrew them.

Remove the three 4mm Phillips #000 screws shown.

There will be foam covers protecting some or all of these screws. These will need to be removed before you will be able to unscrew them.

Step 7

Using tweezers, disconnect this ribbon cable by pulling straight out.

Using tweezers, disconnect this ribbon cable by pulling straight out.

Step 8

Repeat step seven (7) for the remaining three wires shown.

Repeat step seven (7) for the remaining three wires shown.

Step 9

Grasp the top of the camera and pull straight up to remove the top panel.

Grasp the top of the camera and pull straight up to remove the top panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    Jeffrey Harn

Member since: 09/20/2018

327 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Central Washington University, Team S1-G3, Pengilly Fall 2018                        

                                                  Member of Central Washington University, Team S1-G3, Pengilly Fall 2018 



                    CWU-PENGILLY-F18S1G3                     


                                            3 Members                     


                                            10 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team