Canon Sx40 Hs Camera Lcd Screen Cover Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

• LCD Screen Cover
• 5 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackCanon SX40 HS camera

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              LCD Screen Cover               

• Open/turn the LCD screen until it fully extends outwards.
• Remove these two 4 mm black screws on the left side of the screen with a Phillips size #00 screwdriver.

Open/turn the LCD screen until it fully extends outwards.

Remove these two 4 mm black screws on the left side of the screen with a Phillips size #00 screwdriver.

1024

Step 2

• Partially close the screen and rotate it 90 degrees until the screen is facing upwards (photo view from the left front of the camera). Remove the 4mm black screw, indicated in the picture, with a Phillips #00 screwdriver.

Partially close the screen and rotate it 90 degrees until the screen is facing upwards (photo view from the left front of the camera). Remove the 4mm black screw, indicated in the picture, with a Phillips #00 screwdriver.

Step 3

• Rotate the screen 180 degrees until the monitor is facing downwards. Remove the 4mm black screw, indicated in the picture, with a Phillips #00 screwdriver.

Rotate the screen 180 degrees until the monitor is facing downwards. Remove the 4mm black screw, indicated in the picture, with a Phillips #00 screwdriver.

Step 4

• Using a plastic opening tool, remove the unfastened LCD screen cover from the camera.
• Be careful not to pry and damage the circuit card under the screen cover.

Using a plastic opening tool, remove the unfastened LCD screen cover from the camera.

Be careful not to pry and damage the circuit card under the screen cover.

Step 5

• This is what you should see after removing the LCD screen cover. Replace the LCD screen cover if damaged.

This is what you should see after removing the LCD screen cover. Replace the LCD screen cover if damaged.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    John Bui                     

Member since: 03/26/2015

352 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UMass Dartmouth, Team 7-7, Cichon Spring 2015                        

                                                  Member of UMass Dartmouth, Team 7-7, Cichon Spring 2015 



                    UMASSD-CICHON-S15S7G7                     


                                            3 Members                     


                                            3 Guides authored