Difficulty
Moderate
Steps
5
Time Required
5 - 10 minutes
Sections
1
- Battery Door Contact
- 5 steps
Flags
2
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
Better Introduction
Improve this guide by completing or revising its introduction.
BackCanon SX40 HS camera
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery Door Contact
- Orient the camera so that the bottom of the camera is facing up and open the battery compartment.
Orient the camera so that the bottom of the camera is facing up and open the battery compartment.
1024
Step 2
- Remove the two circled 2mm screws with a Phillips #00 screwdriver.
Remove the two circled 2mm screws with a Phillips #00 screwdriver.
Step 3
- Slide the metal battery contact away from the battery compartment cover.
Slide the metal battery contact away from the battery compartment cover.
Step 4
- Remove the battery compartment cover from the metal bracket.
Remove the battery compartment cover from the metal bracket.
Step 5
- Replace either the internal metal battery contact or external battery compartment cover.
Replace either the internal metal battery contact or external battery compartment cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
John Bui
Member since: 03/26/2015
352 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team 7-7, Cichon Spring 2015
Member of UMass Dartmouth, Team 7-7, Cichon Spring 2015
UMASSD-CICHON-S15S7G7
3 Members
3 Guides authored
