Difficulty
Moderate
Steps
13
Time Required
15 - 20 minutes
Sections
4
- LCD/Buttons
- 4 steps
- Motherboard
- 5 steps
- Print Mechanism
- 3 steps
- Battery Leads
- 1 step
Flags
0
BackCanon Selphy CP1200
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD/Buttons
- Unscrew the four 6mm PH000 corner screws.
- This will require a screwdriver with a long, narrow shaft.
Unscrew the four 6mm PH000 corner screws.
This will require a screwdriver with a long, narrow shaft.
1024
Step 2
- Unscrew the three 4mm PH1 screws on the bottom of the printer.
Unscrew the three 4mm PH1 screws on the bottom of the printer.
Step 3
- Gently pry open the top of the case from either the front or back.
- A plastic opening tool may help.
- Be careful in lifting the top assembly as it is attached to the motherboard at this point.
Gently pry open the top of the case from either the front or back.
A plastic opening tool may help.
Be careful in lifting the top assembly as it is attached to the motherboard at this point.
Step 4
- Keeping the top assembly elevated, detach the ribbon cables connecting the LCD and buttons to the motherboard from the motherboard.
- Tweezers may be useful given the limited space between the top assembly and motherboard.
- The top assembly, containing both the LCD and buttons, will now be completely free
Keeping the top assembly elevated, detach the ribbon cables connecting the LCD and buttons to the motherboard from the motherboard.
Tweezers may be useful given the limited space between the top assembly and motherboard.
The top assembly, containing both the LCD and buttons, will now be completely free
Step 5
Motherboard
- Detach the fan cable from the motherboard.
Detach the fan cable from the motherboard.
Step 6
- Detach the ribbon cable leading to the DC in port and battery leads.
- Tweezers may be useful.
Detach the ribbon cable leading to the DC in port and battery leads.
Tweezers may be useful.
Step 7
- Unscrew the three 3mm PH000 screws from the motherboard.
Unscrew the three 3mm PH000 screws from the motherboard.
Step 8
- Disconnect the bundled cables leading to the printing mechanism.
Disconnect the bundled cables leading to the printing mechanism.
Step 9
- Gently lift the motherboard and detach the ribbon cables leading to the print mechanism.
- Tweezers may be useful due to the limited amount of space.
Gently lift the motherboard and detach the ribbon cables leading to the print mechanism.
Tweezers may be useful due to the limited amount of space.
Step 10
Print Mechanism
- Open the side door and depress the ink cassette release.
- Slide out and remove the ink cassette.
Open the side door and depress the ink cassette release.
Slide out and remove the ink cassette.
Step 11
- Unscrew the three 3mm PH000 screws securing the metal plate to the printing mechanism.
Unscrew the three 3mm PH000 screws securing the metal plate to the printing mechanism.
Step 12
- Lift out the print mechanism of the printer case.
Lift out the print mechanism of the printer case.
Step 13
Battery Leads
- Lift out the back case plate.
- Remove the battery leads by lifting it out of its niche in the case.
Lift out the back case plate.
Remove the battery leads by lifting it out of its niche in the case.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
W Sherer
Member since: 01/16/2019
605 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Eastern Washington University, Team S1-G3, Crawford Winter 2019
Member of Eastern Washington University, Team S1-G3, Crawford Winter 2019
EWU-CRAWFORD-W19S1G3
3 Members
5 Guides authored
