Canon Powershot Sx530 Hs Back Panel Assembly Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Canon PowerShot SX530 HS Back Panel Assembly
4 steps

Flags

BackCanon PowerShot SX530 HS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Canon PowerShot SX530 HS Back Panel Assembly

Flip over the camera.
Use a Phillips PH000 to remove the two 4mm screws near the center of the camera.
Use a Phillips PH000 to remove the two 6mm screws on the ends of the camera.

Flip over the camera.

Use a Phillips PH000 to remove the two 4mm screws near the center of the camera.

Use a Phillips PH000 to remove the two 6mm screws on the ends of the camera.

1024

Step 2

Locate the left side of the camera.
Use a Philips PH000 to remove the two 6mm screws.

Locate the left side of the camera.

Use a Philips PH000 to remove the two 6mm screws.

Step 3

Rotate the camera to the side with the removable cover containing the HDMI and mini USB ports.
Use the Phillips PH000 to remove the 7mm screw located next to the HDMI port. This screw has red loctite.
Use the Phillips PH000 to remove the 4mm screw near the USB port.
Use the Phillips PH000 to remove the 7.4mm screw near the USB port.

Rotate the camera to the side with the removable cover containing the HDMI and mini USB ports.

Use the Phillips PH000 to remove the 7mm screw located next to the HDMI port. This screw has red loctite.

Use the Phillips PH000 to remove the 4mm screw near the USB port.

Use the Phillips PH000 to remove the 7.4mm screw near the USB port.

Step 4

Rotate the camera to locate the side with the LCD screen.
Use a Phillips PH000 to remove the two 6mm screws above the LCD screen.
Once the screws are out the back panel, it is ready to be taken off. Grip the backside of the camera and pull it away evenly on every side. The backside must come off straight from the front.

Rotate the camera to locate the side with the LCD screen.

Use a Phillips PH000 to remove the two 6mm screws above the LCD screen.

Once the screws are out the back panel, it is ready to be taken off. Grip the backside of the camera and pull it away evenly on every side. The backside must come off straight from the front.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors

                    Xavier Patrick

Member since: 02/02/2017

481 Reputation

                                      3 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       USF Tampa, Team 16-4, Blackwell Spring 2017                        

                                                  Member of USF Tampa, Team 16-4, Blackwell Spring 2017 



                    USFT-BLACKWELL-S17S16G4                     


                                            4 Members                     


                                            9 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team