Difficulty
Easy
Steps
8
Time Required
5 minutes
Sections
2
- Battery
- 3 steps
- Back Cover
- 5 steps
Flags
0
BackCanon PowerShot SX500 IS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Rotate the camera to expose the underside of the camera.
Rotate the camera to expose the underside of the camera.
1024
Step 2
- Slide the rounded rectangle tab to the left to release the battery cover.
Slide the rounded rectangle tab to the left to release the battery cover.
Step 3
- Push the small orange tab forward to release the battery (Battery is ready for removal).
Push the small orange tab forward to release the battery (Battery is ready for removal).
Step 4
Back Cover
- Using the Phillips 00 screwdriver, remove the two 4mm top screws above the LCD screen.
Using the Phillips 00 screwdriver, remove the two 4mm top screws above the LCD screen.
Step 5
- Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.
Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.
Step 6
Step 7
- Using the Phillips 00 screwdriver, remove the three 4mm screws from the underside of the camera.
Using the Phillips 00 screwdriver, remove the three 4mm screws from the underside of the camera.
Step 8
- Using the plastic pry tool, remove the back cover from camera.
Using the plastic pry tool, remove the back cover from camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Jody Wilkerson
Member since: 04/07/2015
547 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
Eastern Washington University, Team 1-4, Plummer Spring 2015
Member of Eastern Washington University, Team 1-4, Plummer Spring 2015
EWU-PLUMMER-S15S1G4
4 Members
6 Guides authored
