Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
1
- LCD Panel Rear Cover
- 5 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackCanon Powershot SX30 IS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
LCD Panel Rear Cover
- Turn the camera so the back of it is facing you.
- Pull the LCD screen towards you in order to open it,
Turn the camera so the back of it is facing you.
Pull the LCD screen towards you in order to open it,
1024
Step 2
- Unscrew the two 3 mm screws shown on the left side of the LCD screen panel using a Phillips screwdriver.
Unscrew the two 3 mm screws shown on the left side of the LCD screen panel using a Phillips screwdriver.
Step 3
- Unscrew the two 3 mm screws shown on the right side of the LCD screen panel.
Unscrew the two 3 mm screws shown on the right side of the LCD screen panel.
Step 4
- Using the plastic opening tool, remove the rear case of the front LCD cover.
Using the plastic opening tool, remove the rear case of the front LCD cover.
Step 5
- Pull off the back panel of the LCD screen and the plastic wire protector. Then replace the back panel.
Pull off the back panel of the LCD screen and the plastic wire protector. Then replace the back panel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Ellis DeVoe
Member since: 04/14/2015
574 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 5-12, Maness Spring 2015
Member of Cal Poly, Team 5-12, Maness Spring 2015
CPSU-MANESS-S15S5G12
4 Members
5 Guides authored
