Canon Powershot Sx280 Hs Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

• LCD Screen
• 10 steps

Flags

0

• BackCanon PowerShot SX280 HS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              LCD Screen               

• Turn off the camera and remove the battery.

Turn off the camera and remove the battery.

1024

Step 2

• Use a Phillips #00 screwdriver to remove the two 3.4 mm screws on the left side of the camera.

Use a Phillips #00 screwdriver to remove the two 3.4 mm screws on the left side of the camera.

Step 3

• Using the same screwdriver, remove the two 3.4 mm screws on the bottom of the camera.

Using the same screwdriver, remove the two 3.4 mm screws on the bottom of the camera.

Step 4

• Lift the small plastic tab, located on the front of the camera, to remove the GPS cover.

Lift the small plastic tab, located on the front of the camera, to remove the GPS cover.

Step 5

• Using the same Phillips screwdriver, remove the two screws that hold the LCD screen.
• Remove the other small tab attached to the LCD screen.

Using the same Phillips screwdriver, remove the two screws that hold the LCD screen.

Remove the other small tab attached to the LCD screen.

Step 6

• When removing the plastic casting, do not pull it all the way off. Detach the small tab first and make sure nothing else is attached to the casing.

When removing the plastic casting, do not pull it all the way off. Detach the small tab first and make sure nothing else is attached to the casing.

Step 7

• To remove the tabs from the camera, remove all screws.
• Slowly lift the screen out of the camera using the tabs.

To remove the tabs from the camera, remove all screws.

Slowly lift the screen out of the camera using the tabs.

Step 8

• Use the tabs, outlined in red, to slowly remove the LCD screen.
• Remove the screws to remove the camera motherboard.

Use the tabs, outlined in red, to slowly remove the LCD screen.

Remove the screws to remove the camera motherboard.

Step 9

• Insert the replacement LCD screen.
• Ensure that the long strip is attached to the original position.

Insert the replacement LCD screen.

Ensure that the long strip is attached to the original position.

Step 10

• To reassemble your device, follow Steps 2 to 9 in reverse order.

To reassemble your device, follow Steps 2 to 9 in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 7 other contributors 

                    Osmand A Munoz                     

Member since: 03/23/2015

228 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       UMass Dartmouth, Team 1-5, Miles Spring 2015                        

                                                  Member of UMass Dartmouth, Team 1-5, Miles Spring 2015 



                    UMASSD-MILES-S15S1G5                     


                                            3 Members                     


                                            5 Guides authored