Canon Powershot Sx160 Is Outer Case Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

• Outer Case
• 3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• BackCanon PowerShot SX160 IS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Outer Case               

• Unscrew 2-4.8mm black screws from the front of the camera using a #0 Phillips screwdriver.
• Unscrew 2-4.8mm black screws from the side of the camera using a #0 Phillips screwdriver.
• Unscrew 2-4.8mm black screws from the bottom of the camera using a #0 Phillips screwdriver.

Unscrew 2-4.8mm black screws from the front of the camera using a #0 Phillips screwdriver.

Unscrew 2-4.8mm black screws from the side of the camera using a #0 Phillips screwdriver.

Unscrew 2-4.8mm black screws from the bottom of the camera using a #0 Phillips screwdriver.

1024

Step 2

• Using your hands, gently separate the back panel from the camera.
• Continue to pull the back panel until it completely detaches from the camera.

Using your hands, gently separate the back panel from the camera.

Continue to pull the back panel until it completely detaches from the camera.

Step 3

• Use your hands to gently separate the front panel from the camera.
• Continue to pull the front panel until it completely detaches from the camera.

Use your hands to gently separate the front panel from the camera.

Continue to pull the front panel until it completely detaches from the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Jamie Secretan                     

Member since: 03/11/2015

1,885 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Colorado Springs, Team 2-3, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 2-3, Panko Spring 2015 



                    UCCS-PANKO-S15S2G3                     


                                            3 Members                     


                                            6 Guides authored                     

Stewie Wewie - Dec 30, 2015

Reply

guide is missing removal of several screws. Four silver screws for front cover. I removed a total of 12 screws to remove covers. Guide only shows 6. Also requires disconnection of flex strip attached to front cover, from below wheel