Canon Powershot Sx160 Is Lcd Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          15 - 30 minutes            

Sections

1

• LCD
• 5 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackCanon PowerShot SX160 IS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              LCD               

• Unscrew the 2-4.8mm black screws from the front of the camera using a #0 Phillips head screw driver.
• Unscrew the 2-4.8mm black screws from the side of the camera using a #0 Phillips head screw driver.
• Unscrew the 3-4.8mm black screws from the bottom of the camera using a #0 Phillips head screw driver.

Unscrew the 2-4.8mm black screws from the front of the camera using a #0 Phillips head screw driver.

Unscrew the 2-4.8mm black screws from the side of the camera using a #0 Phillips head screw driver.

Unscrew the 3-4.8mm black screws from the bottom of the camera using a #0 Phillips head screw driver.

1024

Step 2

• Use your hand to gently separate the back panel from the camera.
• Continue to pull the panel until it becomes completely detached from the camera.

Use your hand to gently separate the back panel from the camera.

Continue to pull the panel until it becomes completely detached from the camera.

Step 3

• Unscrew the 3-3.75mm silver screws from the function wheel panel of the camera using a #0 Phillips head screw driver.
• Remove the function wheel panel from the camera and set aside.

Unscrew the 3-3.75mm silver screws from the function wheel panel of the camera using a #0 Phillips head screw driver.

Remove the function wheel panel from the camera and set aside.

Step 4

• Unlatch the LCD ribbon connector from the camera by gently lifting up on the ribbon while pulling away from the camera.
• Be extra cautious not to tear the ribbon.

Unlatch the LCD ribbon connector from the camera by gently lifting up on the ribbon while pulling away from the camera.

Be extra cautious not to tear the ribbon.

Step 5

• Using your hand, pull the LCD screen away from the camera and replace.

Using your hand, pull the LCD screen away from the camera and replace.

Congratulations, you have successfully replaced your LCD screen. To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Jamie Secretan                     

Member since: 03/11/2015

1,885 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Colorado Springs, Team 2-3, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 2-3, Panko Spring 2015 



                    UCCS-PANKO-S15S2G3                     


                                            3 Members                     


                                            6 Guides authored